POSTPONED: Two-Part Building Energy Modeling Course Part 2 | Green Building Training Program

NOTE: This event is a two-part series. The course is arranged in this way to allow you to practice the energy modeling in between courses:

Class 1: Aug 20th from 9:30 AM to 4:00 PM

Class 2: Sept 3rd from 9:30 AM to 4:00 PM

Introduction to Energy Modeling with eQuest

12 Hour Training presented by Built Environment Plus

Building Energy Modeling is a versatile, multipurpose tool that is used in new building and retrofit design, green
certification, qualification for tax credits and utility incentives. The importance of creating energy models for a
building is growing as we focus on building energy efficiency as a key strategy to fight climate change and global
heating.

Learning Objectives:
After completing the course, attendees will be able to:
1) describe how modeling is used as part of an integrative design process
2) construct simple commercial building energy models using eQuest
3) interpret the results of energy models
4) distinguish between design models and validation models

Prerequisites and Target Audience
What will students need to know or do before starting this course?
This is a hands-on, project-based course that will give you the confidence to use energy modeling on your
projects. While there are no specific pre-requisites, knowledge of the building industry and basic building science
will be helpful.

The course will be spread across two days. At the conclusion of day one, attendees will be asked to perform
modeling exercises (aka homework) outside of class, to be completed by the next class session. Each section
will build upon previous work in class. By the end of the class, students will have created, run and QCed an
energy model on a building of their choosing. Along the way, we’ll touch on the uses of energy modeling in an
integrated design process, and some of the standards that apply to energy modeling such as ASHRAE 90.1
Appendix G.

Note that students will need access to a computer with the Windows operating system, and administrative rights
to be able to load the eQuest software. 

Detailed Agenda

Day 1
9:30 AM – Start
• Introductions
• Uses of Energy Simulation
• Overview of eQuest
• Intro to Our Project
• Setting up Building Geometry

12:30 – 1PM Lunch Break
• Internal Loads
• HVAC systems
• Energy Targets
• Parametric Runs

4:00 PM – Finished for the Day

Goal for Day 1
1) Download and install eQuest
2) Get a general familiarity with the eQuest interface
3) Set up our Model in Wizard Mode
4) Identify an Energy Target for our project
5) Run Parametics to identify three energy saving strategies

Day 2
9:30 AM – Start
• Recap, Q & A
• Intro to Detailed Mode
• Tips and Tricks
•Creating Code Baseline

12:30 – 1PM Lunch Break
• Working Session
• Modeling Uncommon Systems
• Quality Control
• Wrap up

4:00 PM – Finished for the Day

Goals for Day 2
1) Move into to Detailed Mode
2) Create your Code Baseline
3) QC Your Results
4) Learn some tips and tricks

Green Building Training Program Information

This course is now funded through the Commonwealth Workforce Training Fund’s Small Business Direct Access Program (SBDAP). If you are a small, Massachusetts-based business that employs 100 people or less, you and your employees may be eligible to take this training session for free! Learn more about this opportunity at our Green Building Training Program website.

** This course will be hosted virtually. All attendees, regardless of whether or not they are eligible for the Green Building Training Program (GBTP), must register for the course through our Eventbrite page. For GBTP participants, your company’s enrollment in the Commonwealth Workforce Training Fund’s Small Business Direct Access Program (SBDAP) must be verified before you can access the Zoom link – unverified participants will not be let into the meeting. **

Bypass Your Inner Critic in Public Speaking: How to Speak up Without Feeling Like an Imposter

Despite popular belief, people’s top fear is NOT public speaking. That is a myth. For many people, especially women, the top fear is public JUDGMENT.

As a professional, how do you OWN what you’re saying without feeling like a fraud?

Whether you’re speaking up in an online virtual meeting, a board meeting or giving a presentation, you need to be able to speak with confidence to influence your listeners.

Key Takeaways from this virtual workshop:
·       Learn how to stop overthinking & be present when you speak.
·       How to speak powerfully & authentically under pressure.
·       How to bypass the number one saboteur in public speaking, your inner critic. 

ABOUT THE SPEAKER

 Webinar Speaker Mary Cheyne (Transformational Public Speaking Trainer & Coach / TEDx Speaker @Magnetic Podium) Mary Cheyne, MBA, is a Transformational Public Speaking Trainer & Coach, and the 2009 World Champion of Public Speaking first runner-up, out of 25,000 contestants from 14 countries. Mary is a TEDx Speaker & has trained over 15,000 people in 30 cities world-wide, including those in Australia, Europe, Asia, Canada, and the US. She’s the best-selling author of the book “Present” Yourself in Public Speaking – Tell Your Inner Critic to SHUT UP! And the Real You to SPEAK UP! This vast experience has led Mary to one important, unvarnished conclusion: “To communicate and persuade effectively, the first person you need to convince is YOURSELF.”

This event is hosted by the BE+ Emerging Professionals of Massachusetts (EPMA) Committee, a community of ascending professionals across the green building industry and allied fields helping drive sustainable and regenerative design, construction and operation of the built environment. The committee provides professional support, development and advocacy tools through active networking, monthly programming and community events.

POSTPONED: Two-Part Building Energy Modeling Course Part 1 | Green Building Training Program

NOTE: This event is a two-part series. The course is arranged in this way to allow you to practice the energy modeling in between courses:

Class 1: Aug 20th from 9:30 AM to 4:00 PM

Class 2: Sept 3rd from 9:30 AM to 4:00 PM

Introduction to Energy Modeling with eQuest

12 Hour Training presented by Built Environment Plus

Building Energy Modeling is a versatile, multipurpose tool that is used in new building and retrofit design, green
certification, qualification for tax credits and utility incentives. The importance of creating energy models for a
building is growing as we focus on building energy efficiency as a key strategy to fight climate change and global
heating.

Learning Objectives:
After completing the course, attendees will be able to:
1) describe how modeling is used as part of an integrative design process
2) construct simple commercial building energy models using eQuest
3) interpret the results of energy models
4) distinguish between design models and validation models

Prerequisites and Target Audience
What will students need to know or do before starting this course?
This is a hands-on, project-based course that will give you the confidence to use energy modeling on your
projects. While there are no specific pre-requisites, knowledge of the building industry and basic building science
will be helpful.

The course will be spread across two days. At the conclusion of day one, attendees will be asked to perform
modeling exercises (aka homework) outside of class, to be completed by the next class session. Each section
will build upon previous work in class. By the end of the class, students will have created, run and QCed an
energy model on a building of their choosing. Along the way, we’ll touch on the uses of energy modeling in an
integrated design process, and some of the standards that apply to energy modeling such as ASHRAE 90.1
Appendix G.

Note that students will need access to a computer with the Windows operating system, and administrative rights
to be able to load the eQuest software. 

Detailed Agenda

Day 1
9:30 AM – Start
• Introductions
• Uses of Energy Simulation
• Overview of eQuest
• Intro to Our Project
• Setting up Building Geometry

12:30 – 1PM Lunch Break
• Internal Loads
• HVAC systems
• Energy Targets
• Parametric Runs

4:00 PM – Finished for the Day

Goal for Day 1
1) Download and install eQuest
2) Get a general familiarity with the eQuest interface
3) Set up our Model in Wizard Mode
4) Identify an Energy Target for our project
5) Run Parametics to identify three energy saving strategies

Day 2
9:30 AM – Start
• Recap, Q & A
• Intro to Detailed Mode
• Tips and Tricks
•Creating Code Baseline

12:30 – 1PM Lunch Break
• Working Session
• Modeling Uncommon Systems
• Quality Control
• Wrap up

4:00 PM – Finished for the Day

Goals for Day 2
1) Move into to Detailed Mode
2) Create your Code Baseline
3) QC Your Results
4) Learn some tips and tricks

Green Building Training Program Information

This course is now funded through the Commonwealth Workforce Training Fund’s Small Business Direct Access Program (SBDAP). If you are a small, Massachusetts-based business that employs 100 people or less, you and your employees may be eligible to take this training session for free! Learn more about this opportunity at our Green Building Training Program website.

** This course will be hosted virtually. All attendees, regardless of whether or not they are eligible for the Green Building Training Program (GBTP), must register for the course through our Eventbrite page. For GBTP participants, your company’s enrollment in the Commonwealth Workforce Training Fund’s Small Business Direct Access Program (SBDAP) must be verified before you can access the Zoom link – unverified participants will not be let into the meeting. **

Two-Part Building Energy Modeling Course Part 2 | Green Building Training Program

About the Class

You and your business may be eligible to take this training for FREE! Learn more about this opportunity at our Green Building Training Program website.

NOTE: This event is a two-part series.* The course is arranged in this way to allow you to practice the energy modeling in between courses:

Class 1: Feb 26th from 9:30 AM to 4:00 PM

Class 2: March 11th from 9:30 AM to 4:00 PM

Building Energy Modeling is a versatile, multipurpose tool that is used in new building and retrofit design, green certification, qualification for tax credits and utility incentives.

Learning Objectives:

After completing the course, attendees will be able to:

  1. describe how modeling is used as part of an integrative design process
  2. construct simple commercial building energy models using eQuest
  3. interpret the results of energy models
  4. distinguish between design models and validation models.

*This course was originally listed as two separate courses occurring on Feb 26th and March 11th.

This course is now funded through the Commonwealth Workforce Training Fund’s Massachusetts Training Exchange. If you are a small, Massachusetts-based business that employs 100 people or less, you and your employees may be eligible to take this training session for free! Learn more about this opportunity at our Green Building Training Program website.